Is your furnace not lighting the way that it should be? It seems like you need a commercial furnace repair service. This is the most common furnace issue that people call repair services about. There are some furnace repairs you can attempt to make yourself, but most of the time, it’s best for you to call in HVAC experts.
Fixing a Furnace that Won’t Light
When it comes to commercial HVAC systems, it is recommended that you call a professional to help you with your repairs. That being said, there are some things you can try at home that might work out. Be very careful and make sure you know what you’re doing. You can attempt to try out these tips, but if all else fails, you should definitely get the professionals to come in and get it done for you. Here are some things that you can try for in the time being:
// Bring Power Back to Your Furnace
If your heater seems to not have any power and won’t light at all, you will want to make sure that the circuit hasn’t been tripped. If you suspect it has, you should flip off then back on to see if it powers up again.
// Reset Your Thermostat
There are many factors that can result in a power failure or interrupt your thermostat programming or settings, even something like a strong storm. Make sure the settings are correct by checking them yourself. See if your heater is set to the correct mode and check if the temperature can be adjusted. Pay attention to what the furnace lights are doing.
// Look at the Pilot Lights
A lot of older, outdated heaters will have a pilot light, unlike the modern electric ignition available today. If the pilot light is blown out, there will be no ignition. This is an issue that you will certainly need to call an expert for, seeing as you should not try to ignite an old furnace by yourself.
// Clean Your Air Filters
If your furnace air filter is dirty and clogged, your furnace will first overwork, then overheat. You will either need to clean this filter or replace it completely; the latter is recommended. This might fix your issues completely, so wait a few minutes to see if it works.
// Clear Out the Condensate Pan
If you own a high-efficiency furnace, know that such a system will produce acidic condensation. You want to check the condensate drain for any clogging from the collection of this liquid. The reservoir will be filled with liquid and may activate the float switch, which might lead to the furnace shutting off. Therefore, you should empty and unclog the drain if possible. If the condensate pan is full, empty it as well. You may want to call someone in to do this for you if you are not sure that you can do it correctly.
// Call a Professional
If you are unsure whether or not you can do these repairs yourself, it’s best to play it safe and call a professional in to assist you. You don’t want to make the problem even worse by trying to fix it yourself if you have no idea what you’re doing.
If you’re looking for an experienced, licensed heating repair service, Penguin Cool is your best option. Call us today and see what we can do for you.
Recent Comments